Knoll Systems HT201 - Manual (Page 15)

Windows 95
There are two methods you can use to change your resolution.
Method 1
1. Move your cursor to the background image and click.
2. In the "Properties" menu, select "Settings."
3. Change your resolution and click "OK."
4. You may be asked to reboot for the changes to take effect, or a message saying, "Windows is
about to resize your display" may appear. You'll be asked if you want to keep your settings.
Select "Yes."
Method 2
1. Click on your "My Computer" icon.
2. Open "Control Panel" and select "Display."
3. Change your resolution and click "OK." After the new resolution is selected.
4. You may be asked to reboot for the changes to take effect, or a message saying, "Windows is
about to resize your display" may appear. You'll be asked if you want to keep your settings.
Select "Yes."
Windows 3.1
1. Click on the "Main" icon and open "Control Panel."
2. Select "Change System Settings" and click on "Option."
3. Choose "Change Display Settings."
4. Select the resolution you want.
5. Choose the current or desired drive.
6. Restart Windows for the changes to take effect.
Macintosh
1. Under the Apple menu, select "Control Panels" and open "Monitors."
2. Click and open "Options."
3. Select your new resolution and click "OK."
Notebook computers and resolution standards
This Projector is designed to project industry-standardized video such as VESA (Video
Electronics Standards Association) or VGA (Video Graphics Array). Notebook computers do not
use industry standards. They use whatever timing is necessary to match their local LCD display.
The end result is typically not standard. By turning off your notebook's display, the timing
parameters are a bit more like the real VESA or VGA signal.
Adjusting the volume of the projector speaker
Press VOLUME + to increase the volume or - to decrease.
The volume can also be adjusted with the menu operation.
Turning off the image and muting the sound temporarily
Press the MUTE button. The image will turn off and the sound will be muted at the same time.
To restore the picture and sound, press the MUTE button again.
Freezing a moving picture
You can capture the desired frame of the moving picture.
Press the FREEZE button. A still image of the current frame will be displayed. To restore the
present picture, press the button again.
Tip: The still picture can also be enlarged.
15