Knoll Systems HT201 - Manual (Page 8)

Connecting Video Equipment
You can connect a document camera,
VCR, laser disc player, and DVD player,
etc.
Connecting to the VIDEO IN
VIDEO/S-VIDEO JACKS
You can connect up to two pieces of
video equipment to the VIDEO IN
jacks following the illustration below.
Two types of connections can be
made. Connect either using the
cables indicated in dotted lines or
those in gray as shown in the drawing
below.
• You can switch the input source
(picture) to VIDEO or S-VIDEO
even if you connect more than one
piece of equipment. S-VIDEO
connection provides more vivid
color and higher resolution
compared to VIDEO connection.
• You can output the sound of one
component through the unit
speaker even when two
components are connected.
Before connecting
• Turn off the components that are to
be connected.
• The unit and computer will be
turned on in "Using the Projector".
Do not turn on either the computer
or unit until you read this section.
• Please also refer to the manual of
the video component to be
connected.
8