Knoll Systems HT201 - Manual (Page 14)

• Adjust the projected image from the source connected to the RGB IN connector.
The resolutions most suitable to the incoming signals will automatically be selected.
However, if any vertical banding, noise, dot interference, or crosstalk appears on the screen,
adjust "PICTURE ADJ," then "FINE PICTURE" using the menus. You can also adjust the
horizontal and vertical position of the image.
8) Adjust the picture elements and select the picture type.
Adjust the picture elements; select the picture type according to the video contents and 16:9.
9) Start using the Projector.
The following functions are available while using the Projector:
• Adjusting the speaker volume,
• Freezing a moving picture, and
• Enlarging the picture.
Image Turns Off
If "POWER OFF" is set to "ON", the image will be turned off if the unit has been projecting a
blank screen for five minutes with an RGB input source.
If the image is suddenly turned off while projecting a computer image, the computer's screen
saver or the unit's POWER OFF function may be activated.
Turning the Projector Off
1)
Operating with the remote control:
Press the POWER OFF button a little bit longer.
Operating with the projector keypad 1. Press the POWER button.
"POWER OFF/ENTER" appears on the screen.
2. Press ENTER
When the projector is turned off, the POWER indicator will start blinking then turn to amber in
about one minute.
***Never turn off the POWER switch (main power) while the POWER indicator is blinking.***
2) If the POWER indicator is lit in amber, press the "O" side of the POWER switch
(main power) on the projector back.
The POWER indicator goes out.
Disconnect the power cord if it is not to be used for an extended period.
Changing computer's video resolutions
Depending on your computer's graphic capability, you may be able to select one of several
resolutions. Generally a computer- either a PC or Macintosh- with 1 MB VRAM will run:
640 x 480 at 16.7 million colors (24 bit True color)
800 x 600 at 65,000 colors.
1024 x 768 at 256 colors.
As the resolution increases, the number of colors you can run decreases. With 2 MB VRAM a
computer will run:
640 x 480 at 16.7 million colors (24 bit True color).
800 x 600 at 16.7 million colors (24 bit True color).
1024 x 768 at 65,000 colors.
1280 x 1024 at 256 colors.
14