Krown Manufacturing 2000 - Manual (Page 11)

HELP MENU
For your convenience, a quick reference Help Menu has been preprogrammed in the Porta Printer
2000.
To access the Help Menu:
The Help Menu is displayed
and printed out.
Simple, easy to follow directions
for placing a call will be
displayed and printed.
To exit the Help Menu:
You may now use your Porta
Printer 2000 to make or answer
a call
HOW TO MAKE A TDD CALL BY USING ACOUSTIC CUPS
1. Turn on the Porta Printer
The PP2000 display window will show
KROWN - PP2000D ON.
2. Place telephone receiver down firmly in the rubber acoustic
cups with telephone cord on the LEFT.
3. If the phone light is on and steady, there is a dial tone.
Dial the telephone number now on your telephone, not on
the Porta Printer. If the phone is not steady nor flashing
your phone extension may be in use by someone else.
4. Watch the Phone Light after you dial the number. If the
light shows:
1) SLOW FLASHING = Telephone is Ringing at the number dialed.
2) FAST FLASHING = Line is Busy at the number dialed.
3) IRREGULAR FLASHING = (1) Your call cannot be completed as dialed. Hang up,
check number and try again, or call the TDD Operator for assistance.
(2) The number is voice only. (3) Your call has been answered by the an
answering machine.
5. The incoming messages are printed in upper case (CAPITAL) letters. Outgoing messages
are printed in lower case (small) letters.
II
9
USING YOUR PORTA PRINTER
CTRL + H HELP MENU
SELECT OPTION 1-5
2 PLACING A CALL
5 KROWN - PP2000D