Krown Manufacturing 2000 - Manual (Page 16)

DIRECT CONNECT WITH THE PORTA PRINTER PP2000D (CONT.)
To set your Porta Printer 2000D to Auto Answer:
1. Connect your Porta Printer 2000D to the AC charger/adapter.
• Make sure you have plenty of paper.
• Make sur eyou have connected your Porta Printer 2000D to the telephone line.
2. Turn the Power Switch ON.
• “Power-on” message such as PP2000D-POWER ON is display.
PRESS
Selects Auto Answer mode.
Select the number of times you want the phone to ring before it is automatically answered by
your TDD.
(Ex.) auto Answer is activated and
will answer in 4 rings.
After a call is received, the PP2000D will automatically send out the prerecorded Auto Answer mes-
sage: “Hello, this is a TDD answering machine. Please leave your name, number and message and
your call will be returned. thank you. GA”
To answer an Incoming Call when the Auto-Answer is ON:
1. Press the [SPACEBAR] once before or after Auto-Answer message is sent.
• The Auto-Answer is removed.
• The Porta Printer 2000D is now “online” with caller.
Alerts your caller that you are on
the line.
Type your greeting on the keyboard.
Your TDD is again in Auto-Answer
and ready to answer calls.
Note: Your Porta Printer 2000D will automatically disconnect and return to Auto-Answer after 20 seconds if neither person is typing. If
you need to prevent this from happening:
You will now not be disconnected.
IMPORTANT: To end your call and return to Auto-Answer:
You have now disconnected the
phone line and you are back in
Auto-Answer.
Press [CTRL]+[0] to turn Auto
Answer OFF.
14
CTRL + 9 AUTO ANSWER ON
4 AUTO ANSWER ON
CTRL + 0 NO. OF RINGS (1-9)?
X X + + X XXX
H E L L O XXX HELLO
CTRL + 0 NO TIMEOUT
CTRL + 9 AUTO ANSWER ON
CTRL + 0 AUTO ANSWER OFF