Krown Manufacturing 2000 - Manual (Page 14)

The Direct Connect feature saves
you time and gives you a better
connection. you can use your
Porta Printer without having to
place the telephone handset into
the acoustic cups. It also gives you
the choice of dialing from the key-
board or from numbers stored in
the Phone Directory (see page 17
for information on storing num-
bers in the Directory.)
To connect your Porta Printer to your telephone line, plug one end of your modular telephone cord
into the telephone wall jack. Plug the other end into either hack on the back of your Porta Printer.
After changing to Direct Connect, it is necessary to press the [SPACE BAR] or [SHIFT] + [DIAL] to
connect with the telephone line.
KEYBOARD DIALING
Turn the Power Switch ON.
The Porta Printer will automatically change to and remain in Direct Connect when you have your
PP2000D plugged into the telephone line.
PRESS:
TDD is now ready to dial
If there is no dial tone, the screen will display.
Check the phone line and press
[SHIFT]+[DIAL] again.
Dial tone is detected.
TDD is now ready to dial. If you
make a mistake, use the [BACK-
SPACE] to correct.
The number is displayed and dialed
after you press the [RETURN] key.
III
DIRECT CONNECT WITH THE
PORTA PRINTER PP2000D
SHIFT + DIAL PLEASE WAIT
LINE NOT CONNECTED
5 5 5 1 2 3 4 5551234
12
DIAL TONE
LINE NOT CONNECTED
RETURN