KTM 990 SUPER DUKE - Manual (Page 17)

Seat lock, removing the seat
The seat lock [1] can be locked with the ignition key.
To remove the seat, insert the ignition key and turn 90° in a clockwise direction. Lift the
seat in the back while pressing near the holding strap and pull off towards the back.
To mount the seat, place it on the motorcycle and position the hooks [2] on the bottom of
the seat behind the dollies [3] on the subframe. Press down on the seat near the holding
strap while sliding it forwards. The two tabs [4] must hook onto the tank. Turn the ignition
key in the seat lock 90° in a counterclockwise direction and pull off. Check whether the seat
is mounted correctly.
Baggage loops
4 loops [5] are mounted on the bottom of the seat to which small pieces of baggage can be
fastened. Fold the loops towards the outside to make them accessible when the seat is mounted.
Baggage weight: max. 5 kg
OPERATION INSTRUMENTS
»
16
1
2
4
3
5
5