Maintenance work on chassis and engine – KTM 990 SUPER DUKE User Manual
Page 59
Adjusting the headlight range
The payload can make it necessary to correct the headlight range.
The headlight range can be adjusted with the adjusting screw
[1]. Turning in a clockwise
direction will increase the headlight range, turning in a counterclockwise direction will
reduce the headlight range.
CONTROL:
Make a mark on a light colored wall behind a horizontal surface, at the height correspon-
ding to the center of the headlight. Position your motorcycle 5 meters (16.4 ft) from the
wall in a fully loaded condition (baggage, driver, passenger) and switch on the low beam.
The light/dark cut-off should be 5 cm (2 in) under the mark (see drawing).
MAINTENANCE WORK ON CHASSIS AND ENGINE
»
58
5 m
x
5 cm
1
E
F
USA design:
The parking light
[E] is located in the upper part of the headlight in the USA design. Bulb
[F] (see Technical specifications – Chassis / Lighting) with high and low beams is mounted
in the lower part of the headlight.
Connect the connectors to the connector support to check all of the bulbs for proper func-
tioning before you remount the headlight.