KTM 990 SUPER DUKE - Manual (Page 9)

OPERATION INSTRUMENTS
»
8
1
2
Combined instrument
The combined instrument is divided into 4 parts.
Function buttons: to select the display modes and basic settings in the display
Tachometer: displays the engine speed
Indicator lamps: provide additional information on the motorcycle operating condition
Display: shows the speed, cooling liquid temperature, time, ambient temperature,
distance traveled (ODO), trip master 1 (TRIP 1), trip master 2 (TRIP 2),
distance traveled since the reserve warning lamp went on (TRIP F)
Function buttons on combined instrument
MODE [1]
Briefly press the MODE button to go to the next display mode. The available display modes
are ambient temperature, distance traveled (ODO), trip master 1 (TRIP 1) and trip master
2 (TRIP 2).
The speed, cooling liquid temperature and time are always displayed.
SET [2]
Press the SET button to reset trip master 1 or 2 to 0.
The 3rd button is not programmed.
Combined instrument display
TEST
When you switch on the ignition, all of the display elements will light up for 1 second for
the function test.
LENGTH
The display will change for 1 second to display the circumference of the front wheel in mil-
limeters. 1870 mm corresponds to a 17" front wheel.
Then the display will change back to the mode that was activated when the ignition was
switched off.