Kenwood KRF-V4530D - Manual (Page 14)

14
Preparations
Speaker placement
Subwoofer
: Place to the front left and right of the listening position.
Front speakers are required for all surround modes.
: Place front and center. This speaker stabilizes the sound
image and helps recreate sound motion. Be sure to connect a center
speaker when using the Dolby 3 Stereo mode.
: Place to the direct left and right, or slightly behind,
the listening position at even heights, approximately 1 meter above the
ears of the listeners. These speakers recreate sound motion and
atmosphere. Required for surround playback.
: Reproduces powerful deep bass sounds.
Front
speaker
Center speaker
Listening
position
Surround
speaker
• Although the ideal surround system consists of all the speakers listed
above, if you don't have a center speaker or a subwoofer, you can
divide those signals between the available speakers in the speaker
settings steps to obtain the best possible surround reproduction from
the speakers you have available.
%
Setting up the system
Loading the batteries
Preparing the remote control
• Insert two AA-size (R6) batteries as indicated by the polarity markings.
3
2 1
Notes
1. The supplied batteries may have shorter lives than ordinary batteries due
to use during operation checks.
2. When the remote-controllable distance gets shorter than before, replace
both batteries with new ones.
3. Placing the remote sensor in direct sunlight, or in direct light from a high
frequency fluorescent lamp may cause a malfunction.
In such a case, change the location of the system installation to prevent
malfunction.
Remote sensor
6 m
• When pressing more than one remote control key successively, press
the keys securely by leaving an interval of 1 second or more between
keys.
Operation
When the indicator is lit, the power turns ON when you press
the key on the remote control. When the power comes ON, press
the key you want to operate.
1
2