Kenwood KRF-V4530D - Manual (Page 7)

7
Preparations
Names and functions of parts
Remote control unit (RC-R0510) (KRF-V5030D/V4530D)
7
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
If TAPE is selected as the input source, this
(A and B) of a double cassette deck.
Use to select the disc number with the multi-
CD player.
8
&
Selects the inputs and sets the remote con-
trol to operate the component registered at
the respective input.
9 *
Use to temporarily mute the sound.
0 %
Use to turn the receiver on and off.
!
Used to operate DVD player.
For details, refer to the instruction manual of
your DVD player.(Press the DVD key for
more than 2 seconds.)
@
Use to return to the operation of the receiver.
#
Use to operate other components.
¡£
Use to receive RDS broadcasts.
1 ™
If CD or MD is selected as the input source,
these keys function as numeric keys. If tuner
is selected as the input source, these keys
are used to call up station presets.
2 %
Use to select the surround sound settings.
Use to operate other components.
3 ¶
Use to adjust the sound quality and ambi-
ence effects.
Use to operate other components.
4 %
Used to make a variety of settings.
@ # ™
If tuner is selected as the input source, these
keys function as P.CALL keys.
4 ¢
If CD or MD is selected as the input source,
these keys function as skip keys.
5 1 ¡
If tuner is selected as the input source, these
keys function as tuning keys.
If CD or MD is selected as the input source,
these keys function as search keys.
6 &
Use to select the maximum adjustment set-
ting for the low frequency range.
$ ∞
Use to select the listening mode.
Use to operate other components.
%
Use to operate other components.
2
If tape is selected as the input source, this key
functions as the play key for side B of the
cassette (the side facing away from the front of
the deck).
^ )
Use to select the broadcast band.
6
If CD is selected as the input source, this key
functions as the play/pause key.
If MD is selected as the input source, this key
functions as the play key.
& )
Use to select the auto tuning mode.
7
If CD or MD is selected as the input source, this
key functions as the stop key.
* 8
Use to operate other components.
( &
Use to adjust the receiver volume.
1
DISC SKIP BASS BOOST
AUTO
PHONO CD/DVD TUNER MD/TAPE
VIDEO1 VIDEO2
2 3
POWER
DVD
POWER
RECEIVER
MENU
P.CALL
TUNING
MUTE
VOLUME
A/B+100
DVD
ENTER BAND
P.CALL
MULTI CONTROL
4 5 6
7 8 9
0 +10
SET UP
OSD
SOUND
RETURN TITLE
LISTEN MODE
1
6
8
7
9
3
2
4
5
0
!
@
#
$
(
&
^
%
*
DISPLAY
PTY
RC-R0510
Press the DVD POWER key on the remote control for more than 2 seconds
to turn on the connected KENWOOD DVD player. Press the DVD POWER
key again to activate the DVD player operation mode.
¡ Search
1 Search
% Cursor »
fi Cursor «
@ Cursor |
# Cursor \
6 3 Play
8 Pause
7 Stop
Enter
OSD menu Menu Return Title
TUNING P.CALL P.CALL
MULTI CONTROL
AUTO
DVD
ENTER BAND 1 2 3
4 5 6
7 8 9
0 +10
OSD
SOUND
MENU
SET UP
RETURN
LISTEN MODE
TITLE
DISPLAY