Kenwood KRF-V4530D - Manual (Page 13)

13
Preparations
–
+
FRONT SPEAKERS
(8 – 16 Ω )
CENTER SPEAKERS
(8 – 16 Ω )
SUB WOOFER PRE OUT
– + + –
FRONT SPEAKERS
SURROUND SPEAKERS
(8 – 16 Ω )
(8 – 16 Ω )
CENTER
SPEAKER
FRONT
SPEAKERS
C L R
+
-
RED BLUE GREEN
GRAY ORANGE
Setting up the system
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ral with ambiguous acoustic imaging. Be sure to connect the speak-
ers correctly.
Connecting the speakers
Speaker impedance
After confirming the speaker impedance indications printed on the rear
panel of the receiver, connect speakers with matching impedance
ratings. Using speakers with a rated impedance other than that indi-
cated on the rear panel of the receiver could result in malfunctions or
damage to the speakers or receiver.
1 2
3 4
Right
Left Right
Left
(Be sure to connect both
surround speakers)
The KRF-V5030D/
V4530D are equipped
with one-touch speaker
terminals.
They are arranged in the
same manner as the
speaker terminals of the
KRF-V7030D/V6030D.
Refer to the instructions
on making connections
to the KRF-V7030D/
V6030D when making
connections to the KRF-
V5030D/V4530D.
1 2
3 4