Kenwood KRF-V4530D - Manual (Page 25)

25
Operations
Ambience effects
Front speaker (L, R)
Subwoofer (SW)
Center speaker
Dolby 3 Stereo
Dolby 3 Stereo is available for systems that do not have surround
speakers. When in the Dolby 3 Stereo mode, the surround information
is redirected to the front left and right speakers. This mode is designed
for use with Dolby Surround program sources, but can also improve
sound field unity for programs that are not Dolby Surround encoded.
Dialog positioning and sound image definition, however, may not be as
accurate when used with programs that are not Dolby Surround
encoded.
Surround Play
The DTS compatible models can reproduce a CD, DVD, or LD carrying
the DTS mark. (KRF-V7030D only)
DOLBY DIGITAL can be used when playing DVD or LD software bearing
the mark and DOLBY DIGITAL (AC-3) format digital broadcasts
(etc.). DOLBY PRO LOGIC and DOLBY 3 STEREO can be used when
playing video, DVD, or LD software bearing the mark.
• Turn ON related components.
• Complete "Preparing for surround sound" (speaker settings).
%
• Use the to select the component you wish to play
back with surround sound.
• Use the key to select the input mode (analog or digital)
for the source you wish to play back. 0
• Noise will be produced when a DTS source is played by selecting the
analog input.
Preparations
1
2
Start playing the video software.
Press the LISTEN MODE (LSTN.M) key to select the
listening mode.
The listening mode settings are stored separately for each input. If the
input mode is set to digital auto ("
" lights), the receiver
selects the optimal listening mode automatically based on the type of
input signal and the speaker settings.
When the DOLBY DIGITAL signal is input:
(The DOLBY DIGITAL, PROLOGIC, or 3 STEREO indicator lights up.)
1 DOLBY DIGITAL surround
2 PRO LOGIC surround
3 3-STEREO surround
4 Normal stereo playback
DVD 6-channel mode
Using a DVD player or the like equipped with six (5.1) output channels
and the receiver, you can enjoy multi-channel encoded DVD source
material in all its splendor. Since the source signals are digital and each
channel is input independently, the resulting sound quality, sense of
spaciousness, and dynamic range are superb.
Front speaker (L, R)
Subwoofer (LFE)*
Center speaker
Surround speakers (L, R)
STEREO
FM
AM
MHz
kHz
PRO LOGIC
3
DOWN MIX
S.DIRECT
MONITOR
DSP
MEMO
ST.
TUNED
AUTO
S
TI.VOL B
CLIP MUTE
RDS EON PTY
TP TA NEWS
SW
SP A R C L
RS LS
LFE
AUTO SOUND DIGITAL
LSTN.M
INPUT
SELECTOR
INPUT
SELECTOR
RC-R0610 RC-R0510
INPUT SELECTOR INPUT MODE
LISTEN MODE
LISTEN MODE
* LFE = Low Frequency Effects. This channel delivers separate non-
directional bass signals to the subwoofer for more dynamic deep bass
sound effects.
The indication "
" appears in the display when a signal is being input
for this channel.