Connecting video components, Connecting a dvd player (6-channel input), Setting up the system – Kenwood KRF-V4530D User Manual

Page 9: About the s video jacks, Caution, Preparations

Advertising
background image

9

Preparations

VIDEO 1

VIDEO 2

VIDEO 3

PLAY IN

PLAY IN

PLAY IN

REC OUT

VIDEO

S-VIDEO

DVD

VIDEO 1

VIDEO 1

VIDEO 2

VIDEO 3

MONITOR

PLAY IN

REC OUT

PLAY IN

PLAY IN

PLAY IN

REC OUT

Connecting video components

OUT

OUT

IN

Video Inputs
(Yellow RCA pin cord)

Video inputs
and outputs
(Yellow RCA pin
cords)

OUT

Setting up the system

OUT

OUT

IN

OUT

Audio inputs and outputs

VIDEO IN

About the S VIDEO
jacks

Use the S VIDEO jacks to
make connections to video
components with S VIDEO
IN/OUT jacks.

÷

If you use the

S VIDEO

jacks to connect your video
playback components, be
sure to use the

S VIDEO

jacks when connecting your
monitor and video record-
ing components.

Connecting a DVD player (6-channel input)

FRONT
OUT L/R

S VIDEO
OUT

COAXIAL
DIGITAL
OUT
(AUDIO)

S VIDEO
cord

SURROUND
OUT L/R

VIDEO OUT
(Yellow RCA
pin cord)

CENTER OUT

SUBWOOFER OUT

S VIDEO

If you have connected a DVD player to the receiver with digital connection,
be sure to read the “Input mode settings” section on the following page
carefully.

Be sure to adhere followings. Or proper ventilation will be blocked
causing damage or fire hazard.

• Install the KRF-V7030D/V6030D/V5030D/V4530D on the top of the

system.

• Do not place any objects impairing heat radiation onto the top of unit.
• Leave a space around the unit (from the largest outside dimension

including projection) equal or greater than, shown below.

Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm

CAUTION

VIDEO

S VIDEO

DVD

PLAY IN

FRONT

L

CENTER

DVD

SURROUND

SUB WOOFER

VIDEO 2

COAXIAL

DVD/6ch INPUT

R

Advertising
This manual is related to the following products: