Klipsch ProMedia 2.1 - Manual (Page 14)

D U A L P R O M E D I A 2 .1 S E T U P I N S T R U C T I O N S
STEP 1: Connect miniplugs to 4 channel PC soundcard from the control satellite preamps; refer to owner’s manual regarding soundcards.
STEP 2: Connect the DIN plugs to the subwoofers from the control satellite preamps.
STEP 3: Connect the speakers by inserting the tinned wired leads into the subwoofers. Red marked leads are for positive terminals, with solid and dashed lines for right/left designation.
The two satellite speakers with the control pods should be the front satellites, and the other two the rear satellites.
STEP 4: Do not plug in the AC power until setting up your system.