Klipsch ProMedia 2.1 - Manual (Page 3)

C O N T R O L P O D F E AT U R E S
Headphones: The 1/8" stereo headphone output jack, located on the right-hand side of the control pod,
turns off the two satellite speakers and the subwoofer output. The main volume control will adjust the head-
phone output.
MP3/Aux: The MP3/Auxiliary input jack is used with portable audio players. This signal will be mixed
with the main source. The input has a +6dB input sensitivity to help compensate for the lower output voltage
of some portable players. To obtain the proper balance with the main signal, the level adjustments in the com-
puter software and in the portable player will need to be adjusted. An example would be listening to an MP3
player while surfing the net and hearing associated sounds from various websites. The mixed sound may not
be desirable, and you will ultimately determine how you use this feature.
NOTE: During playback of MP3 files, overall sound quality may be perceptibly degraded compared to other
audio sources such as CD. This is caused by the encoding method and quality of the MP3 file. It is recom-
mended that MP3 files be encoded at a minimum 128 bit rate.
S P E C I F I C AT I O N S
Total System Frequency Range: 32Hz-20kHZ
Maximum Acoustic Output: 106dB Peak
Amplifier Headroom: 2 X 35 watts-satellites
1 X 130 watts-subwoofer
Satellite Impedance: 4 ohms minimum
Preamplifier Control Pod: Subwoofer and Main volume level controls
LED power indicator
MP3/Aux player line input with soundcard mixing function
Headphone jack
Direct path interface
Satellite: Sealed elliptical two-way enclosure with 0.75" polymer dome
tweeter mated to MicroTractrix(r) Horn and 3" long-throw
mid-bass driver
Subwoofer: Bass-reflex enclosure with front port and side-firing 6.5"
long-throw driver; flared tuned port; sixth-order enclosure design
Amplifier: Digital linear hybrid amplifier; discrete MOSFET output
power section
Subwoofer Limiter: Protective limiter function protects the driver and amplifier
from extremely high volume playback
A C C E S S O R I E S
All accessories are available at www.klipsch.com.
RB-1 Speaker Stands
Telescopic floor stand for ProMedia satellites. Cast metal base, hollow tubing (allowing wire to be hidden
inside). Minimum height: 28 inches. Maximum height: 48 inches.
WB-1 Wall Mount Brackets
Versatile Wall Bracket 1 is made from the same quality steel as the ProMedia satellite pedestals. The clean,
simple design affords the most extreme angle adjustment, with up to 160 degrees of movement for precise
speaker positioning in the horizontal plane. Wall stud wood screws included.
T R O U B L E S H O O T I N G
If no sound, ensure that:
- Power, input, speaker cables and connectors are securely attached
- Software is properly installed and functioning
- Computer sound (control panel) volume is turned up and not muted
- LED glowing
If one or more speakers have little or no sound, ensure that:
- All cables are connected properly
- Connectors are fully "seated" in soundcard and speakers
- Main and subwoofer level controls are properly adjusted on control pod
- Computer software audio settings are adjusted for proper use
- Computer system's sound (control panel) volume is turned up
If the satellites or subwoofer exhibit distortion or buzzing:
- Turn down computer's overall volume (via control panel), and reduce control pod volume
- Turn down subwoofer volume, as program signal may be too strong
- Plug the subwoofer power cord into a surge protector
If there is noise or hissing and the volume is low even with main volume turned up:
- Turn up computer's sound volume (via control panel)
- Turn down main volume on control pod to compensate
- Ensure that software/ hardware is properly installed and operating
If there is computer monitor interference:
- Make sure the subwoofer is positioned at least 10" from the computer monitor
- Increase the distance between the satellite speakers and the computer monitor
For more detailed information and FAQs, please visit www.klipsch.com.
WA R R A N T Y— U . S . a n d C a n a d a O n l y
KLIPSCH, LLC ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (sub-
ject to the terms set forth below) for a period of one (1) year from the date of purchase. During the warranty
period, KLIPSCH will repair or replace (at KLIPSCH's option) this product or any defective parts. Proof of pur-
chase in the form of a bill of sale or receipted invoice, which is evidence that this product is within the war-
ranty period, must be presented or included to obtain warranty service. This warranty does not cover damage
due to misuse, abuse, negligence, acts of God, accident, commercial use or modification of, or to any part of
this product. This warranty does not cover damage due to improper operation, maintenance or installation, or
attempted repair by anyone other than KLIPSCH or someone authorized by KLIPSCH to do warranty work. Any
unauthorized repairs will void this warranty. This warranty does not cover product sold AS IS or WITH ALL
FAULTS. This warranty is invalid if the factory applied serial number or date stamp has been altered or
removed from this product.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF
THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT
PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED
WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF MERCHANTABILITY
AND FITNESS FOR A PRACTICAL PURPOSE.
Some states do not allow the exclusion or limitation of incidental or consequential damages or implied war-
ranties so the above exclusions may not apply to every customer. This warranty gives you specific legal rights,
and you may have other rights which vary from State to State.
To obtain warranty service, please follow these directions:
1. If you purchased this product from a retail store, please return this product to such store in its original
packaging along with proof of purchase.
2. If you purchased this product from a computer manufacturer, please contact that manufacturer.
3. For purchases made through www.klipsch.com, please call KLIPSCH Customer Service at 1-888-554-5665.
Product may only be returned to KLIPSCH after a Return Authorization number has been obtained
from KLIPSCH.
Returned product must be shipped, freight prepaid to KLIPSCH in either its original packaging or packaging
affording an equal degree of protection along with proof of purchase.
WA R R A N T Y— O u t s i d e t h e U . S . a n d C a n a d a
The warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply
with applicable law and shall be the sole responsibility of the distributor that supplied this product. To obtain
any applicable warranty service, please contact the dealer from which you purchased this product, or the dis-
tributor that supplied this product.