Krown Manufacturing 2000DLD - Manual (Page 22)

DIRECT CONNECT WITH THE MEMORY PRINTER (CONT.)
AUTO (DIRECT) DIALING
Turn the Power Switch ON.
Indicates your TDD is ready
to operator.
If in acoustic mode, the Memory Printer will automatically change to and remain in Direct Connect
when you plug your TDD into the phone line. It will display: “Large Visual” if you get MP2000DLD.
TDD is now ready to dial.
If the TDD is not plugged into the phone line, the screen will display:
Check phone line and press
[SHIFT] + [DIAL] again.
TDD is now ready to dial.
Choose phone number location
M (for example) and dials.
REDIAL
If you want to use the Redial feature, don’t turn the TDD off after you dial a number. Use [CTRL] +
[9] to disconnect the telephone line.
Automatically redial the
last number dialed
There is another unique feature that the MemoryPrinter provides. If you intend to use the
MemoryPrinter behind a PBX or a telephone system that will send a second dial tone to your phone
after you have dialed the access code for outbound calling (usually an 8 or a 9), the TDD will detect
this secondary dial tone and dial the rest of the number automatically. This features is activated by
using the + sign between the digits.
This feature may be used in keyboard dialing or memory dialing.
5551234 will be dialed after a short waiting time for a second dial tone.
HANG-UP KEY
Note: When in Direct Connect it is possible to make several phone calls without turning the Memory Printer OFF between each
call. To hang-up (disconnect) between calls, press [CTRL] and ]9]. The Memory Printer is then ready for you to make another call.
20
KROWN - MP2000D
SHIFT + DIAL TYPE NUMBER OR A-Z
LINE NOT CONNECTED
TYPE NUMBER OR A-Z
M DIALING 5551234
CTRL + DIAL CHECKING FOR DIAL TONE
9 + 5 5 5 1 2 3 4 9 + 5 5 5 1 2 3 4
CTRL + 9 DISCONNECT (Y/N)?
Y DISCONNECTED