Krown Manufacturing 2000DLD - Manual (Page 25)

DIRECT CONNECT WITH THE MEMORY PRINTER (CONT.)
Your incoming TDD calls will be answered, printed and stored in Memory Bank 5.
To answer an Incoming Call when the Auto-Answer is ON:
1. Press the [SPACE BAR] several times before or after Auto-Answer message is sent.
• The Auto-Answer is removed.
• The Memory Printer is now “on-line” with caller.
Alerts your caller that you are on
the line.
Type your greeting on the keyboard.
NOTE: Your Memory Printer will automatically disconnect and return to Auto-Answer after 60 seconds if neither person
is typing. If you need to prevent this from happening.
You will now not to disconnect.
IMPORTANT: To end your call and return to Auto-Answer:
You have now disconnected the phone
line and you are back in Auto-Answer.
To turn Auto-Answer OFF:
TO ACTIVATE REMOTE MESSAGE RETRIEVAL AND DELETION
The Remote Message Retrieval feature lets you retrieve your messages while away from home. You
may also delete (erase) these messages after you have read them. Be sure to first store a PIN in
location “0” of the Phone Directory (see page 17).
Set your Memory Printer to Auto-Answer (see previous page).
To retrieve your messages:
1. Dial your number.
• Auto-Answer will answer with your personalized message. The time and date will appear at
the beginning of each message.
2. Type your PIN after the message is finished.
• Make sure your PIN is 5 or more letters in length.
• All of your message will be sent to you.
3. The message:
“RE-ENTER UR PIN TO ERASE MESSAGES”, will be received on your TDD screen.
4. If you wish to ERASE the message that you just received, type your PIN now.
23
X X + + X XXX
H E L L O G A XXX HELLO GA
CTRL + 0 NO TIMEOUT
CTRL + 9 AUTO ANSWER ON
CTRL + 0 AUTO ANSWER OFF