Krown Manufacturing KR2812 - Manual (Page 26)

6
EN
3. Once the second handset answers the call, press Talk on the first
handset to end its connection. The second handset will be engaged
in the external call.
NOTE: When transferring a call, the first handset must wait for the other
handset to answer before pressing Talk to complete the transfer .
To establish a conference call between two handsets and an external party:
. If a handset has an active connection (external) and another connection
is on hold, a conference call may be established by pressing CONF.
During a conference call, the calling and called handset displays the
following on the LCD:
If a handset is connected to the external line and a second handset is off
hook, a conference call is immediately established.
. To disconnect a conference call on one of the handsets, press
Talk. The
connection continues between the remaining party and the external
party.
The paging function is used to help locate handsets. Paging of all handsets
is done by pressing Page from the base unit. Paging stops automatically
after 0 seconds or if any key is pressed on the handset or base unit.
KEY FUNCTION
Press to scroll up menu and sub-menu options
Press to scroll down menu and sub-menu options
MENU Press to confirm selection
DEL
Press to exit to previous menu and / or exit and return to
standby mode
MAKING A CONFERENCE CALL
ONE-WAY BASE PAGING
MENU SETTINGS
NAVIGATING HANDSET MENUS