Krown Manufacturing KR2812 - Manual (Page 38)

38
EN
following two conditions:
. This device may not cause harmful interference.
. This device must accept any interference received, including interference
that may cause undesired operation.
Your telephone has built-in lightning protection to reduce the risk of
damage from surges in telephone line and power line current. This lightning
protection meets or exceeds FCC requirements. However, lightning striking
the telephone or power lines can damage your telephone.
Lightning damage is not common. Nevertheless, if you live in an area that
has severe electrical storms, we suggest that you unplug your phone when
storms approach to reduce the possibility of damage.
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that
contains, among other information, a product identifier in the format US:
KT5W400BKR8. If requested, this number must be provided to the
telephone company.
An applicable certification jacks Universal Service Order Codes (USOC) for
the equipment is provided (i.e., RJC) in the packaging with each piece of
approved terminal equipment. The mounting of the approval unit in the final
assembly must be made so that the approved unit is isolated from exposure
to any hazardous voltages within the assembly. Adequate separation and
restraint of cable and cords have provided.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected
to a compatible modular jack that is also compliant. See installation
instructions for details.
The REN is used to determine the number of devices that may be
connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most but
not all areas, the sum of RENs should not exceed five (5.0). To be certain
of the number of devices that may be connected to a line, as determined
by the total RENs, contact the local telephone company. [For products
approved after July 3, 00, the REN for this product is part of the product
identifier that has the format US:KT5W400BKR2812. The digits represented
LIGHTNING
CONSUMER INFORMATION