Stereo delay, Tereo, Elay – KORG SV-1 User Manual
Page 52
50 – The effects in detail | Reverb/Delay Effects section
S
TEREO
D
ELAY
This is KORG’s 24-bit digital delay, the DL8000R. With the exception of the sam-
pling frequency and wave control of the DELAY TIME, the circuit is essentially
identical. Since this is a full-stereo design, it’s particularly effective when using a
stereo output.
Parameters
Values
Notes
BPM
39.95…300
Sets the delay time in BPM (Beats Per Minute).
L Delay
Thirty-sec…Whole
Specifies the base note of the left channel delay.
R Delay
Thirty-sec…Whole
Specifies the base note of the right channel delay.
Feedback
0…100
Adjusts the amount of feedback. This results in an
increase/decrease of the number of repetitions.
Hi Damp
0…100
Adjusts the amount of high-frequency attenuation.
Mix
0…100
Adjusts the mix amount of the delay.
SV1-100-EditorGuide-EFGI.book Page 50 Wednesday, June 3, 2009 12:35 PM