Stereo mastering limiter, Tereo, Astering – KORG SV-1 User Manual
Page 54: Imiter

52 – The effects in detail | Total FX section
S
TEREO
M
ASTERING
L
IMITER
This is a stereo limiter that is optimized for giving the sound a “produced” feel.
Parameters
Values
Notes
Ratio
1.0 : 1 … Inf : 1
Sets the signal compression ratio. Compression is
applied only when the signal level exceeds the
THRESHOLD value.
Threshold
-40…0 [dB]
Sets the level above which the compressor is applied.
Attack
1…100 [ms]
Sets the attack time. A higher attack time will cause
the compression to be applied more slowly, and not
react fast enough for louder notes.
Release
1…100 [ms]
Sets the release time. A higher release time will cause
the compression to be released more slowly; this may
cause the cue of some softer notes to be cut.
Gain
- Inf, -38…+24 [dB]
Sets the output gain. Use it to compensate for the
gain loss caused by compression.
Parameters
Values
Notes
Threshold
-30…0 [dB]
Sets the level above which the compressor is applied.
Out Ceiling
-30…0 [dB]
Sets the output gain. Use it to compensate for the
gain loss caused by compression.
Release
0.00…1000.00 [ms]
Sets the release time.
SV1-100-EditorGuide-EFGI.book Page 52 Wednesday, June 3, 2009 12:35 PM