Kenwood DVR-5070 - Manual (Page 10)

10
Preparations
DVR-5070 (EN)
Back of the Receiver
Caution:
Do not plug in the power lead until all connections are completed.
When connecting the related system components, refer also
to the instruction manuals of the related components.
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or
fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including pro-
jection) equal or greater than, shown below.
Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm
Malfunction of microcomputer
If operation is not possible or erroneous
display appears even though all connec-
tions have been made properly, reset the
microcomputer referring to “In case of
difficulty”. T
Caution : Read this page carefully to ensure
safe operation.
System Connections
1 SPEAKER terminals
2 AUDIO input/output terminals
SAT/CABLE IN (SATELLITE or CABLE input) terminals
VCR IN/OUT terminals
Analog recording of DTS-encoded discs is not
possible.
TV IN terminals
3 DVD COMPONENT VIDEO OUT terminals
4 SUBWOOFER PRE OUT terminal
5 VIDEO (Composit) / S-VIDEO input/output terminals
VCR IN/OUT terminals
SAT/CABLE IN (SATELLITE or CABLE input) terminals
MON. OUT (MONITOR output) terminals
1 2 3 4 5 6
7 8 9
6 AC cable
7 DIGITAL IN terminals
OPTICAL input terminals
SAT/CABLE (SATELLITE or CABLE) terminal
VCR terminal
COAXIAL input terminals
SAT/CABLE (SATELLITE or CABLE) terminal
VCR terminal
8 DIGITAL OUT OPTICAL terminal
Digital out signal is PCM format. Use for digital recording
with an MD recorder or a CD recorder
9 Antenna terminals