Speaker setting, Positioning the speakers – Kenwood DVR-5070 User Manual

Page 46

Advertising
background image

46

DVR-5070 (EN)

Operations

Positioning the speakers

To achieve the optimum effects obtainable with this SURROUND SOUND system, it is important to position the speakers
properly. Refer to the following illustration to find the best location in your room.

Speaker setting

Center channel
flush with
front of TV

Left satellite
1- 3 ft.(0.3-1m)

Right satellite
1- 3 ft.(0.3-1m)

Place the surround
speaker beside or behind
the listeners, above ear
level

Subwoofer in comer for
maximum bass output

5-9 ft.
(1.5-3 m)

The surround speakers
may be mounted near the
floor facing up, beside or
behind the listening
position

Center Channel

Place the unity center channel on top of the video moni-
tor or TV set. The front of the speaker should be flush
with the front of the television.

Subwoofer

The level of bass output from the subwoofer will vary at
different positions in the room
Corner placement provides the most bass output, while
placement near only one wall provides somewhat less
bass. Since low bass sounds are omnidirectional-the ear
can't tell from which direction they're coming-the
subwoofer can be located out of sight in the corner of
the room, yet all the sound, including the bass. appears
to come from the Unity's front speakers.

Front Satellite Speakers

The best location for the front speakers is to either side
of the video monitor or TV. The speaks can be wall-
mounted, or placed on a bookshelf, with equally good
results.

Rear Satellite Speakers

The best location for the rear speakers is to the side and
slightly behind the listeners. The speakers can be wall-
mounted facing out, as shown. It may be easier to run
wire to the speakers if they are mounted near the floor,
facing up towards the ceiling. This position will produce
excellent surround results. Mounting brackets for both
options are included.

Advertising