Kodak EasyShare Series 3 - Manual (Page 44)

38 www.kodak.com/go/support
Troubleshooting
Nothing
happens when
you try to print
(from computer) ■ Check the USB connections from the printer dock to the computer
(
page 23 ).
■ The computer may be transferring pictures. Wait a few seconds, then try
to again.
■ Access the printer menu for your system. Remove check marks next to
Pause Printing and Offline, if checked.
■ Close unnecessary software applications. Disconnect then reconnect the
USB cable from the printer dock to the computer (
page 23 ).
■ Make sure Kodak EasyShare software is installed ( page 20 ). Install if
necessary. If you choose Custom installation, make sure to install the
printer driver.
■ Uninstall, then reinstall Kodak EasyShare software ( page 20 ).
■ Make sure your computer meets the minimum system requirements
(
page 20 ). Upgrade your system if necessary.
Printing is slow
NOTE: When printing a large number of prints, printing may slow down to prevent the
print head from overheating.
■ Make sure the printer dock is not placed in direct sunlight or is not
operating in a high-temperature environment.
■ Make sure the cooling vents are not blocked or dirty ( page 1 ).
■ Close unnecessary software applications.
■ Make sure your computer meets the minimum system requirements
(
page 20 ). Upgrade your system if necessary.
If... Try the following