Kodak EasyShare Series 3 - Manual (Page 50)

44 www.kodak.com/go/support
Troubleshooting
Print button/light
Light status Cause Action/solution
Light glows steady
green The printer dock is ready for
printing. None required.
Light blinks green The printer dock is printing.
Light is off There are no pictures in the
camera or on the card. None required.
To enable Print:
1 Take pictures.
2 Dock the camera, or connect a
compatible Kodak card reader
(
page 14 ). If using a card
reader, make sure a memory
card is inserted.
The camera is not docked or a
compatible Kodak card reader is
not connected.
The camera is not properly seated
on the connector. Reseat the camera on the printer
dock (
page 10 ).
The camera or card reader is
transferring pictures to the
computer, or has established an
active connection to the
computer. None required.
When transfer is complete, press
the blinking Transfer button,
.
A PictBridge compatible device is
connected. None required.
The Print button is disabled; print
command is controlled from the
PictBridge compatible device. To
print from another source, unplug
the PictBridge compatible device.