Kodak EasyShare Series 3 User Manual
Page 52
46
www.kodak.com/go/support
Troubleshooting
Still having problems?
, or see
camera manufacturer.
Transfer button/light
Light status
Cause
Action/solution
Light glows steady
green
The printer dock is ready for
transferring pictures.
None required.
Light blinks green
Pictures are being transferred
to the computer.
None required.
After transferring pictures, the transfer
light continues to blink green until
either the Transfer button is pressed
again or the connection is no longer
available.
Light is off
There are no pictures in the
camera or on the memory
card.
None required.
To enable Transfer:
1
Connect printer dock to computer
(
).
2
Take pictures.
3
Dock the camera, or connect a
compatible Kodak card reader
(
). If using a card reader,
make sure a memory card is
inserted.
The camera is not docked, a
compatible Kodak card reader
is not connected, or a memory
card is not inserted.
The printer dock is not
connected to the computer.
The camera is not properly
seated on connector.
Reseat the camera on the printer dock
(
).
The printer dock is printing in
standalone mode.
The Transfer button is disabled.
The computer is off.
Turn on the computer.