How to use the unit – Kalorik USK MCH 33526 User Manual

Page 9

Advertising
background image

Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.

Print only

what is inside the frame.

9

USK MCH 33526 - 110815


Assembly page 9/28






Fax +32 2 359 95 50

HOW TO USE THE UNIT

Pouring water to Boiler

Unplug power cord from AC mains.

Unfasten the boiler cap from the base unit by turning it anti-

clockwise to “

“ and lift it, as shown in fig (a)

Check the boiler is empty by turning the Base Unit upside down
and found no water comes out.

Clean the boiler if necessary, refer “How to clean the boiler” for
cleaning.

Use only drinkable water and refer to the “Steam Table” for
volume of water to be filled-in

We recommend to use purified or distilled water to minimize the
amount of mineral deposit that will else build-up inside the boiler.

Fill water into Measuring Beaker up to desired “min” marking.

Pour water into the boiler carefully, as shown in fig (a)

Secure the Cap on Boiler by turning it clockwise to “

“, as

shown in fig (b)

Warning!

To meet hygiene requirements, do not use any other liquid to fill
the boiler. Use water only

Advertising