Kenwood DPX-8030MD - Manual (Page 42)

English
— 42 —
Troubleshooting Guide
The messages shown below display your systems
condition.
EJECT: No disc magazine has been loaded in the changer.
The disc magazine is not completely loaded.
E01
No Disc: No disc has been loaded in the disc magazine. E02
➪ Load a disc into the disc magazine.
Error 04: The CD is quite dirty. The CD is upside-down. The CD
is scratched a lot.
➪ Clean the CD and load it correctly.
Error 05: The CD is upside-down. E05
➪ Load the CD correctly.
Blank Disc: Nothing has been recorded on the MD. E10
No Track: No tracks are recorded on the MD, although it has a
title.
E11
Error 12: MDs designed for data.
Error 15: Media was played that doesn’t have data recorded
that the unit can play.
E15
Error 30: The faceplate of the slave unit being connected to
this unit has been removed.
E30
➪ Replace it.
Error 77: The unit is malfunctioning for some reason. E77
➪ Press the reset button on the unit. If the "Error 77"
code does not disappear, consult your nearest
service center.
Mecha Error: Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason. E99
➪ Check the disc magazine. And then press the reset
button on the unit. If the "Mecha Error" code does
not disappear, consult your nearest service center.
H-HOLD: The protective circuit in the unit activates when the
temperature inside the automatic disc changer
exceeds 60°C (140°F), stopping all operation.
E0d
➪ Cool down the unit by opening the windows or
turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing
again.
No Name: • Attempted to display DNPS during the CD play
having no disc names preset. E51
• Attempted to display SNPS during the receiving
session of the station having no station name
preset.
E50
No Title: Attempted to display the disc title or track title while
the MD having no MD title/MD Group title is being
played.
No Text: • Attempted to display the disc text or track text
while the CD having no CD text is being played.
• Attempted to display the ID3 tag or contents
description while the MP3/WMA having no ID3 tag
or contents description is being played.
LOAD (Blink): Discs are being exchanged in the Disc changer.
File Check: The unit is reading the data on the disc.
Please Close: Attempted to operate the disabled button while the
disc is being ejected (faceplate being slid open).
DPX-8030MD_U.S_r3 02.3.22 3:14 PM Page 42