Kenwood DDX5034M - Manual (Page 46)

46 DDX5034/DDX5034M
q Starts voice recognition.
See <Calling by Voice Recognition> (page
50).
w Returns to the previous screen.
⁄
• While your car is moving, some functions are disabled for
safety’s sake. The buttons associated with the disabled
functions become ineffective if pressed.
• When the Hands-Free Control screen appears, the name
of the connected cell-phone is displayed for 5 seconds.
• * Since the number of steps of the control unit is different
from that of the cell-phone, the statuses displayed on
the control unit may discord from those displayed on
the cell-phone. No status is displayed if information
about it cannot be obtained.
• Setting the cell-phone in the private mode can disable
the hands-free function.
When Received a Call
When you receive a call, you can use the hands-
free phone.
1 Respond to a call
2
3
4
1
When a call arrives, the Talking screen appears
automatically.
1 Starts conversation with a person called.
Switches the call destination if you hear a
tone of call-waiting.
Resumes conversation with the person on
hold after completed conversation with the
other party.
2 Disconnects the phone.
3 Switches the voice output between phone
and speaker.
4 Outputs dial tone.
See <Controlling Tone-based Services>
(page 47).
Calling by Entering a Phone Number
Makes a call by entering a phone number.
1 Display the number input screen
2 Enter a phone number
1
2
3 4
1 Calls the entered phone number.
2 Creates an SMS for the entered phone
number.
See <SMS (Short Message Service)> (page
55).
3 Clears the number.
4 Returns to the previous screen.
3 Make a call
You can start talking when the destination
responds.
4 End the call
The Hand Free screen reappears.
⁄
• You can input max 32 digits.
Hands Free Unit Control