Kenwood DDX5034M - Manual (Page 60)

60 DDX5034/DDX5034M
Setup Menu
DivX Setup
Checks the registration code. This code is needed
when making a disc which has DRM (Digital
Rights Management).
1 Display the DivX Setup screen
Touch in the "Setup
Menu" screen (page 56).
1
1 Displays the registration code.
⁄
• When downloading a DivX VOD file controlled by DRM,
register the code appeared on the screen such as the
one above. Otherwise the file may not be able to play
with this unit. Remaining number of viewing is displayed
when playing a DivX VOD file with the viewing restriction.
When the remaining number of viewing reached 0, a
warning message appears and the file cannot be played.
System Setup
You can set up the system parameters.
1 Display the System Setup screen
Touch in the "Setup
Menu" screen (page 56).
2 Setup each item
5
2
3
4
1
1 Moves to the "System Setup 2" screen.
2 Turns the key touch tone On or Off.
( "ON")
3 Allows scrolling of text display on the
Source Control screen. ( "Auto")
"Auto": Scrolls the screen automatically.
"Manual": Allows you to scroll the screen
manually.
4 Selects a remote control signal. ( "ON")
When turned "OFF", the remote control of
TV reception is rejected.
5 Sets a music CD playback. ( "1")
"1": Automatically recognizes and plays
back an Audio file disc, a DVD or a
music CD.
"2": Forcibly plays back a disc as a music
CD. Select "2" if you wish to play a
music CD having a special format or
if you cannot play a disc in the "1"
position.
⁄
• You cannot play an Audio file/VCD disc in the "2"
position. Also, you may not play some music CDs in the
"2" position.
• Your setup is disabled when the disc is being played.