Kenwood DDX5034M - Manual (Page 56)

56 DDX5034/DDX5034M
Setup Menu
Displays the Setup menu to set various functions.
1 Display the control screen of any source
Touch any source button on the "Source Select"
screen.
2 Display the Setup Menu
3 Select the setup item
1
2
2
1 The selected setup screen appears.
2 Scrolls the setup menu.
⁄
• [Audio Setup] and [AV Interface] options can be locked.
The key mark ( ) is displayed in reverse video for the
locked option. See <Setup Memory> (page 77).
You can set up various receiver parameters.
Setup Menu
Audio Setup
You can setup a speaker network, etc.
1 Display the Audio Setup screen
Touch in the "Setup
Menu" screen (page 56).
⁄
• [Audio Setup] cannot be selected under the following
conditions:
– When no source is selected.
– When dual zone function is set to on. See <Zone
Control> (page 80).
2 Setup each item
2
3
4
1
1 Selects the speaker to set the crossover. See
<Crossover Network Setup> (page 57).
2 Sets the availability of subwoofers. This
can be selected only when Preout is set to
"Subwoofer". See <System Setup> (page
60).
3 Selects the type of front speakers.
"Standard": Setup for general diameter
speakers
"Narrow": Setup for small diameter
speakers
"Middle": Setup for middle diameter
speakers
"Wide": Setup for large diameter
speakers
4 Switches to the crossover setup screen.
See <Crossover Network Setup> (page 57).