Accessories, Use voice training, Set headset sounds – Kyocera Torino S2300 User Manual

Page 65: Enable auto-answer, Set com port speed, Connect to tty device

Advertising
background image

User Guide

65

Answer Using Voice Answer

When you receive an incoming call, the phone
prompts “Incoming call, answer?” With the
caller recognized as a contact entry in your
phone, the phone prompts “Incoming call from
(Name), answer?” Do one of the following:

Say “Yes” or press any key except the End
key to answer the call.

Say “No” or press the End key to ignore
the call.

Remain silent. The voice alert repeats twice
and the phone rings once before returning
to the home screen.

Use Voice Training

If your phone has trouble recognizing your
voice, you can train your phone to recognize
your specific voice for numbers.
1. From Voice Training, read the message

and select OK > Train Numbers > OK.

2. Follow the prompts for each number until

training is complete.

Note: You must read the numbers digit by digit
for voice training to work.

Accessories

Set Headset Sounds

With a headset attached to your phone, you can
play the ringer through the headset or phone
speaker.
From Headset Sounds, select Out of Phone
(ringing from the phone speaker) or Out of
Headset
(ringing from the headset).

Enable Auto-Answer

From Auto-Answer, select After 5 Seconds.
The phone automatically answers after five
seconds with a headset attached.

Set Com Port Speed

From Com Port Speed, select a data rate at
which your phone connects to a laptop or PC.
Check with your service provider for details.

Connect to TTY Device

You can connect the phone to a teletype (TTY)
device for the hearing impaired. (TTY device
sold separately.)
Note: Enable TTY only when using the phone
with a TTY device.
1. Connect the TTY device to your phone.
2. From TTY Device, select OK to clear the

notification.

3. Select one of the following:

TTY Off disables TTY.
TTY On enables TTY devices.
TTY On + Talk enables TTY devices

and voice carry over.

TTY On + Hear enables TTY devices

and hearing carry over.

Note: You can also enter ##889 with your
keypad and select TTY to enable TTY.

Advertising