Kyocera Torino S2300 - Manual (Page 9)

User Guide 9
1 Get Started
Phone Battery
Install the Battery
1. With the back of the
phone facing you, press
on the back cover and
slide it to the bottom of
the phone.
2. Lift the back cover from
the bottom to remove.
3. Place the battery in the
battery casing. The metal
contacts of the battery
must touch the metal
contacts of the battery
casing.
4. Align the back cover
side tabs with the slots
on each side of the
phone.
5. Slide the back cover to
the top of the phone until
it is securely in place.
Charge the Battery
1. Open the microUSB jack
cover on the top of the
phone. Connect the AC
adapter to the microUSB
jack.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of
the screen tells you whether the phone is:
– Charging (the icon is animated)
– Partially charged
– Fully charged
You must have at least a partial charge in the
battery to make or receive calls. You can safely
recharge the battery at any time, even if it has a
partial charge.
Note: Before removing the battery, make sure
the phone is powered off.
!
!