Kyocera Torino S2300 - Manual (Page 67)

User Guide 67
Set Location Information
Use Location to share your location
information with network services other than
emergency services (for example, 911, 111,
999 and 000) in serviced areas. This feature
works only when your phone is in digital
mode. You do have the option of turning off
the locator to emergency services.
From Location, select one of the following:
•
911 Only (default) shares your position
information only with emergency services
when you call your 3-digit emergency
code.
• Location On shares your position
information, in addition to emergency
services.
Set Web Alerts
You can set an alert to confirm the start or end
of a browser session.
From Web Alert, select one of the following:
•
At Start prompts when you start a session.
• At End prompts when you end a session.
• Both prompts when you start and end a
session.
• No Prompts sets for no prompts.
Enable Roaming Call Alert
You can set the phone to warn you before you
answer or place a call while roaming.
Note: Call prompt is disabled when the phone
is in Emergency Mode.
From Roam Call Alert, select Enabled.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept
or place a call while roaming, you must press
1.
Security
This section describes the security features on
your phone. You can adjust these features to
prevent access to your personal information.
All security features are shielded by a
four-digit lock code (typically 0000 or the last
4 digits of your phone number).
Lock Phone
Set Lock Phone
With your phone locked, you can call only
emergency numbers or your service provider’s
customer service number. You can still receive
incoming calls.
1. From Security, enter your four-digit lock
code.
2. Select Lock Phone > OK and one of the
following:
– Lock Now locks the phone
immediately.
– On Power Up locks the phone every
time you turn it on.
Unlock the Phone
1. From the home screen, select Unlock.
2. Enter your four-digit lock code.