Kettler 8427-182 - Manual (Page 17)

Slide braces onto axle of rear
frame.
STEP 2 – REAR FRAME ASSEMBLY
M6x30 (4x) Ø12 (4x) Ø10 (4x) M06 (4x)
Insert carriage bolts into the back four holes of wagon bed
(not shown); use a mallet to lightly tap into place. Flip
wagon body upside down. Slide the rear frame with
braces onto the four bolts; ensure that the braces are
mounted toward the center of wagon bed. Slide Ø12mm
washer onto bolt, follow with Ø10mm lock washer, and
securely tighten with M06 nut.
Rear Frame
Brac
e
17