Kettler 8427-182 - Manual (Page 18)

Slide wheels onto front and rear axle
with the valve stem facing outward.
Slide Ø16 washer onto axle and secure
wheels by tapping the hubcap retainer
into place with a mallet.
STEP 3 – TIRE & HANDLE ASSEMBLY
Ø16 (4x)
Ø12 (1x)
M06 (1x)
M6x70 (1x)
Mount the handle to front
frame; ensure that the curve
of handle shaft is pointed
away from wagon bed. Insert
bolt through front frame,
bottom of handle shaft, and
opposite hole of frame, slide
Ø12mm washer onto bolt and
securely tighten with M06 lock
nut.
Retainer (4x)
Handle
18