Kettler 8427-182 - Manual (Page 3)

this has been done. If any parts require replacement, use only original spares manufactured
by KETTLER®.
Use of the Toy
■ Ensure that the toy vehicle is not used until it has been properly assembled and checked by an
adult person.
■ Always adjust the use of the wagon to the conditions encountered.
■ Wagons do not possess a continuously effective brake system. Therefore, safeguard the wagon
against rolling away when parking it. Never park the wagon unattended with a child on it!
■ Instruct your child how to use the wagon correctly and draw attention to possible sources of
danger.
■ Although dangerous situations are unlikely to occur if the wagon is used correctly, children at
play should, if possible, be supervised.
■ Please bear in mind that there is always a danger of children injuring themselves while using
swings, climbing frames, toy vehicles or similar equipment.
■ When children are at play, situations may arise which cannot be predicted by the manufacturer
and for which he cannot be held responsible.
■ Before use, always check all screws and plug‐in connections as well as respective safety devices
fit correctly.
■ Keep this unit clean and dry. Wipe off dirt, moisture, and oil with a clean soft cloth. Never use
corrosive or abrasive substances to clean the toy. Never use substances which may cause
pollution of the environment.
■ For models with pneumatic tires: Due to the nature of materials used in pneumatic tires, it is not
recommended for the product to be left in any one place for too long where solvents or other
chemicals, i. e. oil, may lie. This may result in a chemical reaction, which could cause the tires to
mark the surface such as a vinyl flooring. If in doubt put something underneath the wheels to
cover the floor. Ensure that air pressure in the tires is correct; if air pressure is too low this
increases wear, and makes riding the toy more difficult!
Assembly of the toy vehicle
■ Please ensure that the wagon will only be used for playing when assembly has been carried out
correctly, and checked, by an adult.
■ The toy vehicle must be assembled carefully by an adult person. Study the assembly instructions
carefully before beginning work. Assemble the vehicle in the exact sequence shown by the
letters in the diagrams. This is essential for the safe function and use of the wagon.
■ Please note that there is always a danger of injury when working with tools or doing manual
work. Therefore please be careful when assembling this product.
■ Ensure that your working area is free of possible sources of danger, for example don’t leave any
tools lying around. Always dispose packaging material in such a way that it may not cause any
danger. There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts
completely against resistance (locking device). Then check that all screw connections have been
tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
3