Konica Minolta bizhub 163 User Manual
Page 149
Advertising
7
Network settings
7-10
IC-206
2
Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer’s default setting is “000000”.
–
If the number was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [,] or [+] key until “NETWORK SETTING” is selected, and
then press the [OK] key.
–
If fax kit FK-506 is installed
Advertising
This manual is related to the following products: