Konica Minolta bizhub 163 - Manual (Page 210)

Registering destinations 8
IC-206 8-21
2
Press the [,] or [+] key until “DIAL REGISTRATION” is selected, and
then press the [OK] key.
3
Press the [,] or [+] key until “SPEED DIAL” is selected, and then press
the [OK] key.
4
Type in the speed dial number for the destination to be edited or delet-
ed, and then press the [OK] key.
After the registered information is displayed, the following screen ap-
pears.
5
Press the [,] or [+] key until “EDIT” or “DELETE” is selected.
– If “DELETE” was selected and the [OK] key is pressed, the message
“DELETED” appears, and then the “DIAL REGISTRATION” menu
appears again.