Konica Minolta bizhub 163 - Manual (Page 354)

Troubleshooting 12
IC-206 12-1
12 Troubleshooting
This chapter provides details on the causes for error messages to appear
and the various operations to correct the problem.
12.1 Main error messages and their remedies
Message Cause Remedy
COMMUNICATION ERROR
XXXX server Communication with the serv-
er is not possible because of
some problem in the machine
or the condition of the net-
work or server. Check the transmission/re-
ception results report.
Consult with the network ad-
ministrator.
CANNOT CONNECT
XXXX server A connection to the server
cannot be established. Check that the Ethernet cable
is correctly connected. (See
p. 1-12.) Check the parame-
ters settings on the “E-MAIL
SETTING 1”, “E-MAIL SET-
TING 2” and “NETWORK
SETTING” menus. Consult
with the network administra-
tor.
CANNOT GET IP
XXXX server The IP address could not be
assigned by the DNS or DHCP
server. Consult with the network ad-
ministrator.
DISCONNECT
XXXX server The connection to the server
was cut. Consult with the network ad-
ministrator.
WRONG PASSWORD
XXXX server The password is incorrect, so
the machine could not log on
to the server. For the POP3 server, check
the settings on the “E-MAIL
SETTING 2” menu. Consult
with the network administra-
tor.
MEM. FULL/TX CANCEL While sending e-mail, the size
of the image data has exceed-
ed the capacity of the memo-
ry. Retrieve the transmission data
stored in the memory.
MEMORY FILE FULL While sending e-mail, the
maximum number of stored
files was used. Retrieve the transmission data
stored in the memory.
SERVER MEMORY FUL
SMTP Server The memory of the SMTP
server has become full while
sending e-mail. Consult with the network ad-
ministrator.
FTP SERVER ERROR While uploading scan data,
the data could not be correct-
ly uploaded to the FTP server. Consult with the network ad-
ministrator.