Installing using plug and play on windows me, Installing using plug and play on windows me -13 – Konica Minolta bizhub 163 User Manual

Page 46

Advertising
background image

Installing the printer driver

2

IC-206

2-13

Installing using Plug and Play on Windows Me

2

Note

If the driver is installed using Plug and Play, first the TWAIN driver for
scanning is installed, next the USB printing support driver is installed, and
then installation of the printer driver begins. The procedure described in
this manual is for the installation of the TWAIN driver, the USB printing
support driver, then the printer driver. For details on the TWAIN driver, re-
fer to the User’s Guide for the TWAIN driver.

Follow the instructions that appear in the Add New Hardware Wizard to com-
plete the installation.

1

Select “Specify the location of the driver (Advanced)” and then click the
[Next] button.

2

Select “Specify a location” and then specify the following folder on the
CD-ROM as the location where the driver is saved.

Folder to be specified: \Driver\Win98_ME\English

The folder can be selected after clicking the [Browse] button.

3

Click the [Next] button.

4

Check the location of the driver, and then click the [Next] button.

A dialog box appears, indicating that the installation is finished.

5

Click the [Finish] button.

This completes the installation of the TWAIN driver.
The Add New Hardware Wizard appears again, and the installation of
the USB printing support driver begins.

6

Repeat steps 1 through 5 to install the USB printing support driver.

This completes the installation of the USB printing support driver.
The Add New Hardware Wizard appears again, and the installation of
the printer driver begins.

7

Repeat steps 1 through 4 to install the printer driver.

A dialog box appears, allowing you to specify the printer name.

Advertising
This manual is related to the following products: