3 specifying an ip address, Specifying an ip address -9 – Konica Minolta bizhub 163 User Manual

Page 74

Advertising
background image

Network printing

3

IC-206

3-9

3.3

Specifying an IP address

The following procedure describes how to assign the IP address to the ma-
chine from the control panel.

2

Note

The IP address setting should be specified according to instructions from
the network administrator.

The IP address setting is specified in Utility mode by the administrator.

1

Press the [Utility] key in the control panel.

2

Press the [,] or [+] key until “ADMIN. MANAGEMENT” is selected, and
then press the [OK] key.

Advertising
This manual is related to the following products: