Kodak MDV 300 - Manual (Page 4)

1
ESSENTIAL SETUP
Video outputs
I n STOP mode, press button ,
setup m enu a ppears.
SETUP 1
2
3
Highlight "Interlace Out" icon, press
button, sub menu appears. ENTER
Highlight “S-Video”, "YCbCr" o r “RGB” as desired
and press
button. . ENTER
The player is equipped with the following video output ports:
Press button to quit. SETUP
DEFAULT
Composite video (CVBS), S-Video, Y Pb Pr, SCART
Y P b Pr
Interlaced scan output:
Progressive scan output:
The factory default video output
setting is S-Video (interlaced scan)
In this mode the active video output ports are:
Composite video (CVBS) and S-Video.
To change the video output setting, after the system
connection is completed (see "SYSTEM
CONNECTION"), follow these steps:
Once the video “Interlace Out” has been set using
this procedure, the active video output ports are as
shown in the table below:
For Progressive scan output
With no disc i n the player press the PROG SCAN button o n the remote control twice. Progressive scan
component signals will be output from the Y/Pb/Pr jacks, whatever the previous “Interlace Out” video setting.
The same procedure is used to switch back to interlace scan mode.
The composite video (CVBS) output
is active in all three video output
settings. Always connect the CVBS
signal to the TV if any problem is
experienced with obtaining a
picture.
When Progressive Scan has been
selected, no signal will be sent to
the CVBS, S-Video or SCART
outputs.
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
Language Video Audio 1 Audio2 Rating
TVScreen
TVSystem
InterlaceOut
FadeMode
4:3LetterBox
Auto
S-Video
Slow
S-Video
YCbCr
RGB
Press button highlight "Video" icon. RIGHT
Press button , sub-menu appears. ENTER
4
5
6
1
2
IMPORTANT NOTE
Video port -> CVBS S-Video Y Pb Pr RGB (SCART)
Interlace Out
S-Video
Y Cb Cr
RGB
Yes N o No Yes
No Yes No Yes
No No Yes Yes