Kenwood DDX5022Y - Manual (Page 45)

English 45
Hands Free Unit Control
Before Use
• To use the Phonebook, it must be downloaded to this
unit in advance. For details, see <Downloading the
Phonbook> (page 45).
For DNX5220BT :
• You need to register your cell-phone before using it with
this unit. For more details, see <Registering Bluetooth
Unit> (page 73).
• If you have registered two or more cell-phones, you need
to select one of them. For more details, see <Bluetooth
Unit Connection> (page 75).
For DNX5220/DDX5022/DDX5022Y/DDX52RY :
• You need to register your cell-phone to your Bluetooth
Unit beforehand. Make sure to read the instruction
manual of the Bluetooth Unit as well.
Downloading the Phonebook
Downloads the phonebook data from the
cell-phone to this unit so that you can use the
Phonebook of this unit.
1 By operating the cell-phone, send the
phonebook data to this unit.
2 By operating the cell-phone, start the
hands-free connection.
⁄
• For the cell-phones which support auto-download of
phonebook:
If the phonebook is not downloaded automatically for
some reasons, follow the procedure above to download
manually.
• For how to operate the cell-phone, refer to the
Instruction Manual that comes with your cell-phone.
• Up to 1000 phone numbers can be registered for each
registered cell-phone.
• Up to 32 digits can be registered for each phone number
along with up to 40 characters representing a name.
• Depending on the type of your cell-phone, the following
restrictions are placed:
- The phonebook data cannot be downloaded normally.
Various functions can be used in the Hands Free control mode.
For DNX5220/DDX5022/DDX5022Y/DDX52RY, Bluetooth unit KCA-BT200 (optional accessory) is necessary.
- Characters in the Phonebook are garbled.
- The phonebook data cannot be downloaded normally
if it contains images. It may take several hours to a full
day to download the phone book depending on the
total image size.
• To cancel downloading of the phonebook data, operate
the cell-phone.
Control Screen Function
Displaying the control screen and using various
functions.
1 Display the Hands-Free Control screen
Press the [FNC] button for more than 1 second.
or
[TEL] button on the "Source Select" screen
Next page 3