Kenwood DDX5022Y - Manual (Page 62)

62 DNX5220BT/DNX5220/DDX5022/DDX5022Y/DDX52RY
2 Adjusts the Red value.
3 Adjusts the Green value.
4 Adjusts the Blue.
5 Returns to the "Panel Color Coordinate"
screen.
3 Select a Preset number to register
Adjusted color is registered to the selected
Preset button.
4 Complete the color coordination
Setup Menu
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
1 Display the AV Interface screen
Touch in the "Setup
Menu" screen (page 56).
2 Setup each item
1
2
3
4
1 Moves to the "AV Interface 2" screen.
2 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT port. (
"VIDEO")
3 Sets an image display of the system that is
connected via the AV INPUT port. ( "OFF")
"OFF": When the image source is switched,
an image entered via the AV INPUT
port is displayed.
"ON": When an image signal is entered
via the AV INPUT port, this image is
displayed.
4 Selects a navigation system connection.
( "RGB") (DDX5022/DDX5022Y/DDX52RY
only)
"RGB": Allows the Kenwood's Navigation
System to connect via the AV INPUT
port.
"AV-IN": Allows a third-party navigation
system to connect via the AV INPUT
port.
"Off": Must be used if no navigation
system is connected. (The
navigation display is cancelled
when the AV source is switched.)