Kenwood DDX5022Y - Manual (Page 61)

English 61
6 7
8
9
6 Returns to the "System Setup 1" screen.
7 Moves to the "System Setup 3" screen.
8 Sets the button illumination color.
See <Panel Color Coordinate> (page 61).
9 When set to "ON", the illumination color of
the screen and buttons changes one after
another.
10
13
12
11
p Returns to the "System Setup 2" screen.
q Moves to the "System Setup 4" screen.
w Sets the Preout output. (Settable only when
in Standby mode)
"Rear" :
Rear sound is output.
"Subwoofer" : Subwoofer sound is output.
e Sets the function of the [NAV] button.
"V. OFF" : Press the [NAV] button for more
than 1 second to turn the display
off.
"R-CAM" : Press the [NAV] button for more
than 1 second to switch to rear
view.
14
15
r Returns to the "System Setup 3" screen.
t Selects a picture display time. ( "Middle")
The Display of a JPEG picture is changed.
("Short", "Middle", "Long")
Panel Color Coordinate
Sets the screen and button illumination color.
1 Display the Panel Color Coordinate screen
See <System Setup> (page 60).
2 Select a color
1
2
3
1 Sets to the touched color.
2 Sets and registers favorite color.
3 Returns to the "System Setup 2" screen.
To register your original color
1 Start the RGB coordinate
2 Adjust the each color value
1
2
3
4
5
1 Selects a preset number to register.
Next page 3