Kenwood KDC-BT8041U - Manual (Page 37)

English | 37
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
P.CONT
ANT.CONT
MUTE
L R
REMO.CONT MIC
AUX
Connecting Wires to Terminals
Battery wire (Yellow)
Ignition wire (Red)
Wiring harness
(Accessory
1)
If no connections are made, do not
let the wire come out from the tab.
Power control/ Motor antenna
control wire (Blue/White)
Mute wire (Brown)
Connect either to the power control terminal
when using the optional power amplifier, or to the
antenna control terminal in the vehicle.
A–7 Pin (Red)
A–4 Pin (Yellow)
Connector A
Connector B
Fuse (10A)
⁄
See next page.
FM/AM antenna input (JASO)
Steering remote control (Light Blue/Yellow)
KDC-BT8141U only
To use the steering wheel remote control
feature, you need to an exclusive remote
adapter (not supplied) matches your car
is required.
To connect the Kenwood navigation system,
consult your navigation manual.
Front output
Rear output/ Sub Woofer output
USB connector (1m)
To USB device
⁄
Do not remove the cap when you do not use the USB cable. The connector
will cause the unit to malfunction if it gets in touch with any metallic part of
the vehicle.
AUX input (Stereo)
Use the mini-plug which is stereo type and does not have any resistance.
To External Display/ Steering
remote
KDC-BT8041U only
Microphone Unit
(Accessory
3) (3 m)