Installation/removing the unit – Kenwood KDC-BT8041U User Manual
Page 40
Advertising
40
|
KDC-BT8041U/ KDC-BT8141U
Installation the Microphone Unit
1
Check the installation position of the microphone
(accessory
3).
2
Remove oil and other dirt from the installation
surface.
3
Install the microphone.
4
Wire the microphone cable up to the hands-free
box with it secured at several positions using tape
or the like.
Fix a cable with a commercial
item of tape.
Peel the release coated paper of double-face adhesive tape to
fix on the place shown above.
Adjust the direction of the microphone to the driver.
Accessory
3
⁄
• Install the microphone as far as possible from the cell-
phone.
Installation/Removing the Unit
Advertising
This manual is related to the following products: