KTM 50 SX PRO SENIOR LC - Manual (Page 15)

ENGLISH
14
PERIODIC MAINTENANCE SCHEDULE 2003
Service
every
5 hours
Service
every
20 hours
M AINTENANCE WORK DONE BY KTM AUTHORISED WORKSHOPS IS NOT A SUBSTITUTE FOR CARE AND CHECKS DONE BY THE RIDER !
A clean motorcycle can be checked more quickly which saves money!
Check engine for leaks ●
Change transmission oil ●
Check spark plug, change it if necessary, set electrode gap ●
Check carburetor for a tight fit at intake flange ●
Check intake flange for cracks ●
Check idle setting when engine is warm ●
Check cooling system for leaks, check quantity of antifreeze ●
Check exhaust system for leaks and suspension ●
Check actuating cables for damage, smooth operation, and kinkless ●
arrangement, adjust and lubricate
Clean air filter and air filter box
●
Check brake fluid level, lining thickness, brake discs ●
Check the brake line and the brake control cable for damage ●
Check/function adjust smooth operation, free travel of handbrake/footbrake levers ●
Check screws of brake system for a tight fit ●
Check suspension strut and fork for leaks and a proper function ●
Check swinging-fork pivot ●
Check/adjust steering-head bearing ●
Check all chassis screws for a tight fit (fork plates, axle nuts, ●
swinging-fork pivot, suspension strut)
Check spoke tension and rim joint
●
Check tire condition and inflation pressure ●
Check chain, chain joint, chain wheels, chain wheel guides for wear, a tight fit, and tension ●
Lubricate chain ●
Check wheel bearings for play ●
IMPORTANT RECOMMENDED MAINTENANCE PROCEDURES TO BE PERFORMED BASED ON A SEPARATE SUPPLEMENTARY ORDER
Drain and clean the carburetor's float chamber ●
Perform complete fork maintenance ●
Clean and lubricate the swinging-arm bearing ●
Clean and lubricate the steering-head bearing and sealing elements ●
Change brake fluid ●
WHEELS
CHASSIS
BRAKES
ADD-ON-PARTS
ENGINE
50 SX PRO JUNIOR/SENIOR LC
water cooled
once a year
CARBURETOR